materials oculus is made of corrosion resistant 356 aluminum alloy with a copper (cu) content of less than 0.1%. the main housing is made of seamless extruded aluminum, with an integrally sealed led light module designed for optimal heat dissipation, and lighting performance. oculus is standard with a unique proprietary design allowing the sealed led module to tilt within the housing. oculus oc750 series is standard with 20o optic. see options section for alternate selection. electrical driver standard driver is 0-10v dimming-ready (dims to 1%) with: 120-277 multi-volt compatibility (50-60hz), operating temperature range of -20oc/-4of to 50oc/122of, and output short circuit protection with auto-recovery. open circuit protection and temperature foldback. led standard 4000k/80cri. optional 2700k, 3000k, 3500k & 5000k. optional amber led for turtle sensitive areas. wavelengths: 584.5nm to 597nm. life 60,000hrs l 85 b 50 (based on iesna tm-21 test method and lm-80 data). 130,000hrs l 70 b 50 (calculated projection from lm-80 data). finish five-stage preparation process including preheating of cast aluminum parts for air extraction, and an environmentally friendly alloy sealant. polyester powder coating is applied through an electrostatic process and oven cured for long term finish. mounting maximum weight: 12 lbs (5.4 kg) remodeling type fixture designed to fit in a 7.5 (191mm) dia. opening on a ceiling 0.5 (13mm) to 1.5 (38m) thick. three locking tabs secure frame in the ceiling and trim snaps in place. locking tabs can be retracted to remove the frame for maintenance. certification tested to ul1598 and csa 22.2 #250. etl listed wet location. rated ip66. ce certification on request. luminis.com luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 email: info@luminis.com 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis 1 1- driver housing with gasketed service door. 2- fixture secured with three locking tabs. 3- fully sealed cast aluminum light assembly. 4- sealed cast aluminum lens frame. 5- clear tempered glass lens. 6- faceted specular aluminum reflector. 7- light module. regressed light module available as an option. 8- trim secured by two wire springs inserted in slots in the mounting flange. 9- cast aluminum trim available in multiple colors. all stainless steel hardware. oc750 series oculus - led 6 exterior recessed downlight oculus light module is designed with a tilting mechanism allowing forward and back light adjustability. the 30o directional module allows to aim the light beam in the desired direction, without disturbing the luminaire mounting. standard fully adjustable 360o rotation. jan 2018 rev.0 3-4-5-6 8 2 9 7 19.83 (503.6) 15.65 (397.5) 5.83 (148.2) 0.5 (12.7) ? 8.33 (211.7) 4.68 (119) ? 5.7 (144.8) 1 oc750 OC750-RG shown with regressed option (rg) type: quantity: project: catalog number: fixture wattage voltage finish option option option
2 typical photometry summary model# oc750 luminaire selection trim & light module color (select one) standard colors wht snow white bkt jet black bzt bronze mst matte silver grt titanium gray dgt gun metal cht champagne optional colors cs custom color ral ral# color 120v 277v optional 347v led light selection voltage finish oc750 series oculus - led suffix input watts delivered lumens cri cct ok l1w12 12w 1588 80 4000k l1w18 18w 2153 l1w30 33w 3725 1 jan 2018 rev.0 options (refer to page 3 for details) electrical light & optics fs fuse alternate cct ok led (lcf: lumen conversion factor) k27 2700k cct 80 cri (lcf: 0.91) k3 3000k cct 80 cri (lcf: 0.94) k35 3500k cct 80 cri (lcf: 0.983) k5 5000k cct 80 cri (lcf: 1.01) note: other cct & higher cri available, please consult factory. alternate reflector optics (20o standard reflector) r12 12o narrow optic r45 45o flood optic r60 60o wide flood optic lsl linear spread lens (asymmetric lens distribution is achieved when light module is tilted) rg regressed light module (light module color is bkt when rg is selected, trim color must still be chosen, not limited to bkt) 2 gl trim glass for water ingress protection in ceiling notes 1- 3221 delivered lumens with gl option 2- cylindrical housing extended by 1 (25.4) for increased cut-off trim light module please visit our web site www.luminis.com for complete i.e.s. formatted download data. descriptive information oc750-l1w30 total lms: 3725 lumens total input watts: 32.43 w source: led efficacy: 114.9 lumens/watt bug: b3-u0-g0 cct/cri: 4000k/80 maximum candela: 13372 @ 0 deg spacing cirterion: 0.46 accessories cpb concrete pour box hl hexcell louver sl solite lens amber led light selection suffix input watts delivered lumens l1w18k2a 17w 388 luminis.com luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 email: info@luminis.com 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis
options oc750 series oculus - led accessories cpb concrete pour box for standard oc750 model. for OC750-RG please contact factory. 24.3 (616.5) 10.1 (256) 7.5 (191.5) 17 (431.8) 3 jan 2018 rev.0 luminis.com luminaires may be altered for design improvement or discontinued without prior notice. toll free: 866.586.4647 fax: 514.683.8872 email: info@luminis.com 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis
|
